Product
Contact
Dongguan Jiahaojin Industrial Co., Ltd.
Contact：Liu sheng
Mobile：13802254172
Tel：0769-81316780
Website：www.jiahaojincom
Address：Jinlan business building in Changan town of Dongguan City
Industry dynamic
How to operate the twin screw granulator correctly?
Author：admin Addtion Date：2018-03-20 View：1225
When filling the operator, we must be optimistic, do not enter the material, and master the temperature. If a twin-screw granulation machine is opened, the phenomenon of sticky head will not appear, the temperature of the die head is too high, and a little cooling can be normal. In general, no stop is not needed; the water temperature should be at 50---60 C, low easily broken bar, beyond easy adhesion, and best to add half hot water when starting the machine, such as when there is no condition, when the grain is cut, the grain cut can be In order to avoid breaking the strip, the water temperature is more than 60 degrees centigrade, and the cold water should be added to the inner circulation to keep the temperature. When the grain is cut, the strip must be pulled to the roll, otherwise the granulator will be damaged. For example, the exhaust holes are competing for the material. It is proved that the impurities have blocked the filter screen. At this time, it is necessary to replace the mesh quickly, and the mesh can be selected with 40---60 mesh.
Up Page：none
Next Page：Advantages of a twin screw extruder
